Network Settings
You can configure the base station to obtain network settings in one of the following ways:
DHCP
By default, the base station attempts to contact a DHCP server in your network to obtain the valid network settings, such as IP address, subnet mask, gateway address and DNS address.
Static
If the base station cannot contact a DHCP server for any reason, you need to configure the IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the base station manually.
To configure the network parameters for the base station manually:
1. Press the OK key to enter the main menu, and then select Settings->System Settings ->Network (default PIN: 0000)->Basic.
2. Select the desired IP addressing mode from the IP Mode field.
3. Press OK to select the desired IP addressing mode
4. Make the desired changes.
5. Press the Save soft key to accept the change
Note:
• The DECT IP phone supports either or both IPv4 and IPv6 addressing modes, but IPv6 is disabled by default.
• Wrong network settings may result in inaccessibility of your phone and may affect the network performance.
Contact your system administrator for the network parameters.